Cabinets & Consumables - Testimonials 


"Since the acquisition of the Anprolene sterilizer we have been able to have a quicker return of our equipment needed for interventional cardiology, therefore reducing the waiting list. We can now sterilize smaller loads and are completly independent from external services".

Dr. Nicole Van Israël, European Specialist in Veterinary Cardiology, Animal CardioPulmonary Consultancy,

"Andersen EOGas Series 3 steriliser allows us to run validated sterilisation cycles in house that are part of our FDA registration (510K) and CE mark. The process is completely compatible with our other production processes."

Mohammed Al-Jallad, Suture Manufacturer Technical Director.
Saudi Arabia

"We have been using Andersen EOGas sterilizers for over ten years in our suture production facility. It has proved to be cost effective and efficient, allowing us total control and time saving in our manufacturing process. Our Series 3 and Series 4 cabinets ultimately allow us total customer satisfaction."

 Brenton Betheldo, Factory Manager,
South Africa.

"We re-process certain instruments for laparoscopy and endoscopy with Anprolene. We also use the cabinet to sterilise large amounts of items like dressings and bandages which cannot go through an autoclave. The system is easy and safe to use, and complements sterilisation using heat and steam."

Dr Maxime Birague, Equine Veterinary Surgeon,
Garonne, France.

"Our Andersen Series 4 EtO steriliser has provided Gyrus with the ability to offer new products to market in reduced time using their bench-top EtO process."

 Alistair Fleming, Medical device manufacturer Project Manager,
Cardiff, Wales

"Our Andersen Series 3 Steriliser has allowed us to bring sterilisation in house and increase our ‘on time – in full’ service level from 60% to 99%. The sterilisation phase of our process has reduced from two weeks to under a day."

Frank Chalmers, Sterile clothing manufacturer CEO,
Melbourne, Australia

"We are very satisfied by the performance of our Anprolene steriliser, which perfectly complements our autoclave. This system delivers savings through the re-sterilisation of items impossible to sterilise by other means. We optimise the value of each cartridge by waiting to have a full load for each cycle."

Dr Adam and Dr Paumier, Veterinary Surgeon,
Deauville, France


"I use our gas sterilizer for all our specialty surgery packs. I find the instruments last longer since they no longer go through the expansion and contraction process with steam sterilization. I also use our gas sterilizer for IV pumps, drills, and all plastic tubing. I cannot think of anything in the hospital that has not been put into the gas. I love the fact that it keeps all my instruments looking as new as the day they were bought. The doctors can see the difference between emergency packs placed in steam and the orthopedic and soft tissue packs placed in gas. I do not know how I ever managed without it. The testing process was not a complicated one and the process of sterilization is a simple one. "

Amy Weiss, LVT, CAHT, Surgical Dept. Mgr.
River Veterinary Emergencies and Referrals
Chattanooga, TN


"I have used my Anprolene Sterilizer 2 times a week for 18 years. WIth the Anprolene damage free sterilization system my instruments last longer."

Clinton Skaggs, DVM
Pratt, KS


"I have used Anprolene everyday for 4 years with no problems. You have the ability to sterilize items like TPLO saws and blades, as well as electric drills without shrouds, drapes and staplers."

Stuart Johnson, DVM
Houston, TX

"We have been using Andersen products for the last 15 years to sterilize our cystoscopic equipment. We recently needed to upgrade our equipment and found them to be extremely helpful in determining and meeting requirements for sterilization equipment.  Within a week we had our new unit up and running and support service was always available to help us with our questions.  I highly recommend Andersen Products for any gas sterilization system needs."

Douglas R. Birns, M.D.
NewYork, NY

"I save more than $12,000 per year on surgery costs by employing Anprolene at the clinic where I practice. I could not operate without it."

M.Joseph Bojrab DVM, MS, Ph.D. 
Las Vegas, NV

"We run it 24/7 and the lights never go out."

David Bays, Tech
Las Vegas, NV

"Our Anprolene sterilizer is one of the best investments our clinic has made. The ability to sterilize a load in 3 1/2 hours has allowed our surgical productivity to increase dramatically. Plastics that cannot be autoclaved can now be gassed, allowing continual savings to the hospital and to the client by keeping overhead lower. The gas unit is very easy to operate and requires minimal staff time freeing up technicians to complete other tasks. There is never a concern about a load "overheating" or burning the outer wrappings as can happen with autoclaves. Again, I cannot emphasize enough how much we use our Anprolene sterilizer and what a positive impact it has on our hospital. "

Markee Kushel, Veterinarian
Littleton, CO